Researchers at the National Astronomical Observatory of Japan (NAOJ) have used the infrastructure of the former TAMA300 gravitational wave detector in Mitaka, Tokyo, to demonstrate a new technique to reduce quantum noise in detectors. 
National Institutes of Natural Sciences

© NAOJ | TAMA300 blazes trail for improved gravitational wave astronomy
This new technique will increase the sensitivity of the detectors comprising a collaborative worldwide gravitational wave network, allowing them to observe fainter waves.
When it began observations in 2000, TAMA300 was one of the world's first large-scale interferometric gravitational wave detectors. At that time TAMA300 had the highest  in the world, setting an upper limit on the strength of gravitational-wave signals; but the first detection of actual gravitational waves was made 15 years later in 2015 by LIGO. Since then,  technology has improved to the point that modern detectors are observing several signals per month. The  obtained from these observations are already impressive, and many more are expected in the coming decades. TAMA300 is no longer participating in observations but is still used as a testbed for new technologies to improve other detectors.
The sensitivity of current and future gravitational wave detectors is limited at almost all the frequencies by  caused by the effects of vacuum fluctuations of the electromagnetic fields. But even this inherent quantum  can be sidestepped. It is possible to manipulate the vacuum fluctuations to redistribute the quantum uncertainties, decreasing one type of noise at the expense of increasing a different, less obstructive type of noise. This technique, known as vacuum squeezing, has already been implemented in gravitational wave detectors, greatly increasing their sensitivity to higher-frequency gravitational waves. But the optomechanical interaction between the  and the mirrors of the detector causes the effect of vacuum squeezing to change depending on the frequency. So at low frequencies, vacuum squeezing increases the wrong type of noise, actually degrading sensitivity.
To overcome this limitation and achieve reduced noise at all frequencies, a team at NAOJ composed of members of the in-house Gravitational Wave Science Project and the KAGRA collaboration (but also including researchers of the Virgo and GEO collaborations) has recently demonstrated the feasibility of a technique known as frequency-dependent vacuum squeezing at the frequencies useful for gravitational wave detectors. Because the detector itself interacts with the electromagnetic fields differently depending on the frequency, the team used the infrastructure of the former TAMA300 detector to create a field which itself varies depending on frequency. A normal (frequency-independent) squeezed vacuum field is reflected off an optical cavity 300 meters long, such that a frequency dependence is imprinted and it is able to counteract the optomechanical effect of the interferometer.
This technique will allow improved sensitivity at both high and low frequencies simultaneously. This is a crucial result demonstrating a key technology to improve the sensitivity of future detectors. Its implementation planned as a near-term upgrade, together with other improvements, is expected to double the observation range of second-generation detectors.
These results will appear as Zhao, Y., et al. "Frequency-dependent squeezed  source for broadband quantum noise reduction in advanced " in Physical Review Letters on April 28, 2020. A similar result has been obtained by a group in MIT using a 16-m filter cavity, and the two papers will be published jointly.

This article was originally published by the National Institutes of Natural Sciences.
Previous Post Next Post